Compost Mixers - Model 2400 Twin Screw Vertical Mixer
Standard Features
Overview | Options | Specs | Success Stories
Each Patz vertical mixer is manufactured at our plant in Pound, Wisconsin, with these standard features:
 |
Constant Velocity (CV) joint on PTO drive shaft. | ||||||
 |
 Safety Chain, Hitch Pin and clevis are standard. Clevis for hitch has a 1-3/8" hole instead of a slot to help prevent wear on the clevis and lessen slapping of the trailer when pulling. |
||||||
 |
Shear bolt in Primary Drive Line protects drive system and 2 speed gearbox. | ||||||
 |
2 Speed Gearbox provides low gear for mixing rations and high gear so mixer can be cleaned out. | ||||||
 |
 Discharge can be to right or left side. Idler end guard can be flipped up for clean-out. All discharges have 36" wide chain conveyors for quick, reliable feed removal. Incline discharges are also available in 41", 66" & 84" lengths. |
||||||
 |
8" x 4" x 1/4" underslung "A" frame (over/under) design provides 18" of support at the point where forces are greatest and allows for a shorter turning radius. This frame design gives added strength in load carrying capacity and load turning strength. | ||||||
 |
 Two oil reservoirs for better monitoring of each individual Planetary Gearbox. |
||||||
 |
10" x 6" x 3/8" rectangular tubing trailer frame. | ||||||
 |
Walking Tandem with 8 wheels and tires for smooth transport over rough terrain. | ||||||
 |
 Strongest Planetary Gearbox in the industry. Grease zerk for planetary located at the rear of the mixer for easy access! |
||||||
 |
Shear bolt on rear drive line provides added protection for the rear Planetary Gearbox. | ||||||
 |
Transport lights with 7 pin connector are standard on all trailer models. | ||||||
 |
A 3/4" floor plate provides the solid structure that the mixer is built on. A 3/4" sub floor plate is welded to the bottom of the floor plate, providing a 1-1/2" base for mounting the planetary. For additional strength and stability, 1/2" reinforcement bars are welded to the bottom. | ||||||
 |
 Two welded steel screws with 5/8" flighting. Pre-drilled to accept knives. 7 knife mount locations on 950 cu. ft. model. 5 knife mount locations on 810 cu. ft. model. |
||||||
 |
1/4" Thick steel side walls designed for maximum life. | ||||||
 |
Manual pack for operator's and parts manuals along with maintenance log. | ||||||
 |
Jackstand 8,000 lbs., capacity swivel mount. Two jack storage locations. | ||||||
 |
 Restrictors are located on front left and right rear of tub. Adjust in or out as desired to control the flow of materials inside. |
||||||
Performance Strong As Steel!
Experience the durability, dependability and proven performance of a
Patz Industrial Vertical Compost Mixer.
Contact your Patz dealer for a demonstration today.
