Patz Industrial Model 1512 Slurry Pump
Overview & Features
Move Slurry to Storage Quickly and Easily!
The Patz Industrial Model 1512 Slurry Pump is designed to handle material ranging in consistency from free-flowing liquid to slurry with fine-cut bedding.
The optional in-line valve provides a positive shutoff to prevent backflow.
With the Patz Industrial Model 1512 Slurry Pump, material drops into hopper from your material mover, or is scraped to the hopper. A plunger forces slurry through PVC pipe to storage.
The Patz Slurry pump is designed for easy maintenance. Both the plunger and plunger sleeve can be removed for inspection. An optional in-live valve installs in the 12-inch or 15-inch PVC pipe buried up to 8 feet deep as a shutoff valve. Install if a backflow is possible. An optional flapper valve fits the end of the PVC pipe in the holding area to prevent material from flowing back into the pipe.
Note: Slurry too dry to flow may require the addition of water. Slurry pumps are not designed for pumping ensilage, hay, wood shavings, lime, sand, crushed rock, etc.
Standard Features of the Model 1512 Slurry Pump
Drive Unit uses 10 HP electric motor. Plunger driven through triple V-belt, double #100 roller chain-and-sprocket drive unit. Large 2-1/2 inch and 1-3/4 inch shafts plus high quality bearings assure durable operation. (Guard removed for viewing.)
180 (U.S.) Gallon Hopper can be filled with material mover or scraper. Constructed of 1/8-inch steel. Approximately 3 ft. by 7 ft. opening at top.
Plunger sleeve with internally functioning plunger mounts in 1/4-inch thick steel chamber embedded in concrete. Plunger and plunger sleeve may be removed for easy servicing without concrete breakup.
One-way valve in plunger opens to fill plunger sleeve on backward stroke. On forward stroke, valve closes and the plunger forces the material toward storage facility.
Fiberglass Cover Guard does not rust and provides long service life.
Read more about the Patz Model 1512 Slurry Pump Specs
