Belt Conveyor - Model 8912 Trough Slider-Bed
Specifications
Standard Equipment
Overall Lengths: 10' (3.048 m) to 160' (48.768 m) in 10' (3.048 m) increments. Maximum length of individual bed section is 10' (3.048 m); modular sections bolt together for lengths beyond 10' (3.048 m). Note: Can field cut to exact length for custom fit.
Frame: Concave open bed, formed 16 ga. high gloss polyester powder coated steel; 6-1/2" (165 mm) depth; 12-7/8" (327 mm) width.
Belt Width: 12" (305 mm).
Belt: None standard; order as optional equipment.
Belt Speed: 370 ft/min (112.8 m/min), 260 ft/min (79.2 m/min), 130 ft/min (39.6m/min), or 65 ft/min (19.8m/min), depending on drive selected.
Drive Pulley: 5" (127 mm) dia., crowned, steel, rubber lagged.
Tail Pulley: 5" (127 mm) dia., finned, steel.
Bearings: Long-life, sealed, prelubricated, greaseable. 1-1/4" bearing on idler and drive end.
Belt Take-up: Screw-type take-up at tail pulley.
Drive Motor: None standard; order as optional equipment.
Drive Mount: None standard; order as optional equipment.
Load Capacity: Up to 56 ft³/min (1.58 m³/min); 3,700 lb/min (1678 kg/min); or 1,100 lb. (499 kg) on conveyor.
Span: Up to 20' (6.096 m) between supports.
Color: Blue high gloss polyester powder coat.
Electrical Controls: Customer supplied, except optional equipment.
Assembly: Conveyor supplied unassembled.
Optional Equipment
Overall Lengths: Conveyor lengths from 4' (1.219 m) to 160' (48.768 m) are possible. Intermediate lengths are possible by field cutting.
Belt: Black, P.V.C. 120 COS, smooth or textured. Other belts available on request.
Drive Motors: 1 to 3 H.P., 1 Ph. or 3 Ph.; hydraulic motor drive also available.
Drive Mounts: Top or bottom mounting; end drive.
Conveyor Supports: Supports and mounting hardware available.
Covers: 20 ga. High gloss, polyester powder coated in 10' (3.048 m) lengths.
Loading Hoppers: Funnels material into conveyor trough.
End Spout: Directs material discharge.
Belt Wipers: Blade and brush types for cleaning top of belts.
Adjustable Decline: Adjust 0° to 30°.
Convey Sides: Positions material and helps seal edges to prevent material under belt.
